PPS-LCF materials Polyphenylene sulfide (PPS) is a linear semi-crystalline polymer with benzene ring and sulfur atoms composed of molecular main chain, its melting point is about 280℃, and has many excellent characteristics, with a series of excellent properties, such as excellent mechanical properties, chemical stability, solvent resistance, flame retardant, and has good processing and molding properties. As a kind of special engineering plastic with the largest output at present, the market application foundation is mature. In addition, in the molding process, pultrusion molding, injection molding, molding and other methods can be processed. By reinforcing PPS resin with carbon fiber, excellent mechanical properties and heat resistance composites can be prepared. At present, PPS fiber reinforced composites have been widely used in the aerospace field. Tencate Company of the United States uses PPS resin of Fortron brand of Ticona company of Germany to produce carbon fiber /PPS composites based on fabric hot pressing molding method. The material is used in Airbus A340 and A380 aircraft wing main edge, A340 aircraft aileron structure, Fokker50 aircraft landing gear door stress rib and girder, G650 business aircraft tail, rudder and elevator components. Advantages Performance characteristics: ◊ receiving aerospace OEM specifications and receiving certification; ◊ excellent cost performance; ◊ Working temperature exceeding Tg according to the design requirements on parts; ◊ laminates can protect against lightning strike and electrochemical corrosion. ◊ inherent flame retardant ◊ excellent chemical stability and solvent resistance; ◊ Long-term storage at ambient temperature. Main applications: ◊ Major and minor aircraft structures: ◊ wing leading edge, engine tower, body splint structure, etc. ◊ aircraft interior structure: ◊ seat structure parts, trunk, etc ◊ On specific requirements on corrosion resistance, dimensional stability, and shock absorption on high-end industrial areas Application Processo de produção Nossa equipe e clientes Venha e entre em contato conosco!

PPS-LCF In carbon fiber composites, carbon fiber reinforced PPS can be said to be a very promising new material, its mechanical properties, corrosion resistance, self-flame retardant and other aspects of the performance is good, so it is often used as a matrix material for various types of high-performance composite materials. The mechanical properties of carbon fiber reinforced polyphenylene sulfide are also affected by the carbon fiber content, under a certain threshold, the larger the carbon fiber content, the stronger the ability to bear external loads. Application Through the reinforcing intervention of carbon fibers, the toughness and strength of polyphenylene sulfide PPS can be substantially increased and improved, becoming one of the most commonly used composites in the aerospace field. Compared with metal, carbon fiber reinforced PPS has the advantages of low cost and easy processing, and the cost can be reduced by 20%-50%. Used in landing gear, wings, doors, fuel tank covers, J-type nose cones, cabin trim and other parts of the aircraft, it not only helps to increase the impact resistance, high temperature resistance and corrosion resistance of these parts, but also improves the load efficiency of the aircraft and reduces fuel consumption by reducing the quality. The most representative application example is the carbon fiber reinforced polyphenylene sulfide composite material for the leading edge of the wing of Airbus A340/A380 aircraft. Datasheet Carbon fiber reinforced PPS production products, with a fast molding, easier to mass production; carbon fiber reinforced PPS with environmental standards, but also able to be used twice, in the production of the entire product as well as the processing of solvents and additives do not need to be introduced, so it can reduce or even a certain degree of avoiding environmental pollution, but also thermoplastic products, unlike thermosetting composite materials can not be reused after the molding of the product, under certain temperature conditions, it has the possibility of recycling, regeneration and reuse. Moreover, unlike thermoset composite products that cannot be reused after molding, thermoplastic products have the possibility of recycling and reuse under certain temperature conditions. In addition, relative to thermoset products, thermoplastic composite products molding speed to be faster, shorter manufacturing cycle, which is conducive to reducing the cost of products. Outros materiais que você pode se perguntar                          PPA-LCF                            PEEK-LCF PA12-LCF                                                                                                                                                                            Testes e Certificações Clientes & Nós Perguntas frequentes 1. Existe um dado de referência unificado para o desempenho do produto de fibra de carbono? O desempenho de filamentos de fibra de carbono específicos é fixo, como os filamentos de fibra de carbono da Toray, T300, T300J, T400, T700 e assim por diante, há uma série de parâmetros que podem ser rastreados. No entanto, não existe um padrão uniforme para medir os produtos compostos de fibra de carbono. Em primeiro lugar, os diferentes tipos de matérias-primas selecionadas levarão a diferentes desempenhos dos produtos e, em seguida, devido à escolha da matriz e ao design diferente dos produtos, isso levará a diferentes desempenhos dos produtos. Além de alguns tubos comuns de fibra de carbono, placas de fibra de carbono e outras peças convencionais, a maioria dos produtos de fibra de carbono na produção da amostra antes do teste para determinar se o desempenho do produto está de acordo com o uso do padrão esperado , e como ponto de base, 2. Os produtos compostos de fibra de carbono são caros? O preço dos produtos compostos de fibra de carbono está intimamente relacionado ao preço das matérias-primas, ao nível de tecnologia e à quantidade de produtos. Alguns produtos dos requisitos do ambiente industrial são altos, o desempenho dos produtos e materiais de fibra de carbono tem requisitos especiais, o que requer a seleção de matérias-primas específicas, matérias-primas, quanto maior o desempenho do preço natural do mais caro, como o aplicação de materiais termoplásticos ortopédicos PEEK de fibra de carbono. Obviamente, quanto mais complexo o processo de produção, ma...